Jaguar XJ (X350). Manual — part 1009
G549822t156 : CHECK THE 5 VOLT SUPPLY CIRCUIT FOR SHORT CIRCUIT
TO GROUND
1. Measure the resistance between:
C31, harness side
Battery
Pin 01
Negative terminal
Is the resistance greater than 100 Kohms?
-> Yes
GO to Pinpoint Test G549822t157.
-> No
GO to Pinpoint Test G549822t162.
G549822t157 : CHECK THE 5 VOLT SUPPLY CIRCUIT FOR SHORT CIRCUIT
TO POWER
1. Measure the resistance between:
C31, harness side
Battery
Pin 01
Positive terminal
Is the resistance greater than 100 Kohms?
-> Yes
GO to Pinpoint Test G549822t158.
-> No
GO to Pinpoint Test G549822t163.
G549822t158 : CHECK THE 5 VOLT SUPPLY CIRCUIT FOR HIGH RESISTANCE
1. Key off. 2. Disconnect the ECM connector, C101. 3. Measure the resistance between:
C31, harness side C101, harness side
Pin 01
Pin D1
Is the resistance less than 10 ohms?
-> Yes
Suspect : - ECM connector. - ECM
-> No
REPAIR the high resistance circuit. For additional information, refer to the wiring diagrams. Clear any
DTCs, test the system for normal operation.
G549822t159 : CHECK THE MAP SENSOR RETURN CIRCUIT FOR SHORT
CIRCUIT TO POWER
1. Measure the resistance between:
C31, harness side
Battery
Pin 03
Positive terminal
Is the resistance greater than 100 Kohms?
-> Yes
GO to Pinpoint Test G549822t160.
-> No
GO to Pinpoint Test G549822t164.
G549822t160 : CHECK THE MAP SUPPLY AND RETURN CIRCUITS FOR
SHORT CIRCUIT TO EACH OTHER
1. Measure the resistance between:
C31, harness side C31, harness side
Pin 01
Pin 03
Is the resistance greater than 100 Kohms?
www.
-> Yes
GO to Pinpoint Test G549822t161.
-> No
GO to Pinpoint Test G549822t165.
G549822t161 : CHECK THE MAP SENSOR RETURN CIRCUIT FOR HIGH
RESISTANCE
1. Key off. 2. Disconnect the ECM connector, C101. 3. Key on, engine off. 4. Measure the resistance
between:
C31, harness side C101, harness side
Pin 03
Pin E2
Is the resistance less than 10 ohms?
-> Yes
Suspect : - MAP connector - MAP sensor - ECM connector - ECM
-> No
REPAIR the high resistance circuit. For additional information, refer to the wiring diagrams. Clear any
DTCs, test the system for normal operation.
G549822t162 : CHECK WHETHER THE SHORT CIRCUIT TO GROUND IS IN
THE HARNESS OR THE MODULE
1. Key off. 2. Disconnect the ECM connector, C101. 3. Key on, engine off. 4. Measure the resistance
between:
C31, harness side
Battery
Pin 01
Negative terminal
Is the resistance greater than 100 Kohms?
-> Yes
Suspect: - ECM
-> No
REPAIR the short circuit. For additional information, refer to the wiring diagrams. Clear any DTCs, test
the system for normal operation.
G549822t163 : CHECK WHETHER THE SHORT CIRCUIT TO POWER IS IN THE
HARNESS OR THE MODULE
1. Key off. 2. Disconnect the ECM connector, C101. 3. Key on, engine off. 4. Measure the resistance
between:
C31, harness side
Battery
Pin 01
Positive terminal
Is the resistance greater than 100 Kohms?
-> Yes
Suspect: - ECM
-> No
REPAIR the short circuit. For additional information, refer to the wiring diagrams. Clear any DTCs, test
the system for normal operation.
G549822t164 : CHECK WHETHER THE SHORT CIRCUIT TO POWER IS IN THE
HARNESS OR THE MODULE
1. Key off. 2. Disconnect the ECM connector, C101. 3. Key on, engine off. 4. Measure the resistance
between:
C31, harness side
Battery
Pin 03
Positive terminal
Is the resistance greater than 100 Kohms?
-> Yes
Suspect: - ECM
-> No
REPAIR the short circuit. For additional information, refer to the wiring diagrams. Clear any DTCs, test
the system for normal operation.
G549822t165 : CHECK WHETHER THE SHORT CIRCUIT IS IN THE HARNESS
OR THE MODULE
1. Key off. 2. Disconnect the ECM connector, C101. 3. Measure the resistance between:
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст