Jaguar XJ (X350). Manual — part 297

Steering Column Multifunction Switch LH
(86.65.78)

Removal

1

.

Remove the steering column lower cowl.

Remove the 2 screws.

If installed, disconnect the steering column and foot pedal control switch

electrical connector.

2 . Remove the steering column upper cowl.

Remove the 3 screws.

3 . Remove the steering column multifunction switch.

Depress the 2 clips.

Disconnect the electrical connector.

Installation

1 .

CAUTION: Make sure the electrical harness is not trapped during the installation.

To install, reverse the removal procedure.

www.

Steering Column Multifunction Switch RH
(86.65.41)

Removal

1 . Remove the instrument panel lower trim.

2 . Detach the steering column lower shroud.

3 . Remove the steering column upper shroud.

4 . Disconnect the steering column multifunction switch RH electrical connector.

5 . Remove the steering column multifunction switch RH switch.

Installation

1 . To install, reverse the removal procedure.

2 . Tighten to 3 Nm.

www.