Jaguar XJ (X350). Manual — part 651

5 . Remove the throttle body intake duct.

6 . Disconnect the throttle body electrical connector.

7 . Detach the throttle body.

8 . NOTE:

Cap the coolant hose to minimize coolant loss.

Disconnect the coolant hose.

9 . NOTE:

Cap the coolant hose to minimize coolant loss.

Remove the throttle body.

Disconnect the coolant hose.

10 . Remove and discard the gasket.

www.

Installation

1

.

CAUTION: Do not attempt to clean the throttle body. The bore and the throttle

plate has a special coating applied during manufacture which should not be removed.

To install, reverse the removal procedure.

Install a new gasket.

2 . Tighten to 10 Nm.

3 . Check and top up the cooling system as required.

www.