Jaguar XJ (X350). Manual — part 280
Detach the power steering fluid reservoir lines.
Installation
1 . To install, reverse the removal procedure.
Power Steering Fluid Reservoir - 2.7L
Diesel (57.15.08)
Removal
1 . Remove the air cleaner.
For additional information, refer to
Air Cleaner (19.10.05)
2
.
CAUTION: If power steering fluid comes into contact with the paintwork, the
affected area must be immediately washed down with cold water.
NOTE:
Clamp the power steering lines to prevent loss of fluid and dirt ingress.
NOTE:
Drain the fluid into a suitable container.
Detach the power steering fluid reservoir lines.
3 . Detach the air pipe from the reservoir.
4 . Remove the power steering fluid reservoir.
Remove the power steering fluid reservoir retaining bolt.
www.
Installation
1
.
CAUTION: If power steering fluid comes into contact with the paintwork, the
affected area must be immediately washed down with cold water.
To install, reverse the removal procedure.
Tighten to 10 Nm.
2 . Bleed the power steering system.
For additional information, refer to
Power Steering System Bleeding (57.15.02 )
Power Steering Pump - 3.0L (57.20.14)
Removal
1
.
Remove the accessory drive belt.
For additional information, refer to
Accessory Drive Belt - 3.0L, VIN Range: G00442->G45703
(12.10.40)
For additional information, refer to
Accessory Drive Belt - 3.0L, VIN Range: G45704->G99999
(12.10.40)
2 . Remove the air cleaner.
For additional information, refer to
Air Cleaner (19.10.05)
3 . Remove the left-hand front wheel and tire.
For additional information, refer to
Wheel and Tire (74.20.05)
4 . Remove the air deflector.
For additional information, refer to
Air Deflector (76.11.41)
5 . Remove the power steering pump lower retaining bolts.
6 . Lower the vehicle.
7
.
CAUTION: Cap the power steering line to prevent loses of fluid and prevent dirt
ingress.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст