Jaguar XJ (X350). Manual — part 743
12 . Detach the starter motor solenoid harness.
13 . Remove the starter motor.
Installation
1 . To install, reverse the removal procedure.
Tighten to 48 Nm.
2 . Tighten to 7 Nm.
3 . Tighten to 10 Nm.
4 . Tighten to 23 Nm.
5 . Tighten to 100 Nm.
www.
6 . Tighten to 35 Nm.
7 . Connect the battery ground cable.
For additional information, refer to Battery Connect (86.15.15)
303-07 : Engine Ignition – 3.0L NA V6 – AJ27
Specifications
Specifications
General Specifications
Item
Specification
Firing order
1-4-2-5-3-6
Spark plug gap
1.3-1.45mm (0.051-
0.057in)
Spark plug type
AWSF22FS
High temperature nickel anti-seize lubricant F6AZ-9L494-AA
(Spark plug thread)
ESE-M12A4-A
Torque Specifications
Description
Nm lb-ft lb-in
Spark plugs
15 11 -
Ignition coil-on-plug retaining bolts 6
-
53
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст