Jaguar XJ (X350). Manual — part 742
6 . Tighten to 7 Nm.
Starter Motor - 2.7L V6 - TdV6 (86.60.01)
Removal
1 . Disconnect the battery ground cable.
For additional information, refer to Battery Disconnect and Connect
2 . Remove the air deflector.
For additional information, refer to Air Deflector (76.11.41)
3
.
Make sure the alignment mark on the steering gear pinion seal protection cover is central to
the steering gear pinion casting.
4 . Disconnect the power steering control valve actuator electrical connector.
5 . Detach the lower steering column.
Remove the steering gear shaft pinch bolt.
www.
6 . Detach the steering gear.
Remove the steering gear retaining bolts.
7 . Using a suitable piece of string secure the steering gear.
8 . Remove the generator cooling duct.
9 . Remove the starter motor retaining bracket.
10 . Detach the starter motor positive cable.
11 . Reposition the starter motor positive cable.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст