Jaguar XJ (X350). Manual — part 1052
8 . Attach the selector lever cable.
9 . Remove the tie down strap.
10 . Install the automatic transmission support retaining bolts.
Raise the rear of the transmission.
Tighten to 50 Nm.
11 . Remove the rubber blocks supplied with special tool HTJ1200-2.
12 . Remove the special tool.
13 . Install the torque converter rubber inspection cover.
14 . Attach the transmission fluid cooler tubes.
1) Attach the transmission fluid cooler tubes.
Install new O-ring seals.
2) Install the retaining plate.
3) Install the retaining bolt.
Tighten to 23 Nm.
www.
15 . Attach the transmission fluid cooler tubes to the oil pan.
Tighten to 10 Nm.
16 . Install the torque converter retaining bolts.
Rotate the torque converter to gain access to the remaining bolts.
Tighten to 55 Nm.
17 . Install the rubber access cover.
18 . Attach the starter motor.
Tighten to 25 Nm.
19 . Attach the engine ground cable.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст