Jaguar XJ (X350). Manual — part 333
All vehicles
4
.
NOTE:
Engine shown removed for clarity.
NOTE:
When an exhaust manifold retaining stud is removed, it must be replaced with a new
retaining stud and nut.
Remove the left-hand exhaust manifold upper retaining nuts.
5 . Remove the left-hand catalytic converter.
For additional information, refer to
6
.
NOTE:
Engine shown removed for clarity.
When an exhaust manifold retaining stud is removed, it must be replaced with a new
retaining stud and nut.
Remove the left-hand exhaust manifold.
Remove and discard the left-hand exhaust manifold gasket.
Installation
All vehicles
1 . NOTE:
Engine shown removed for clarity.
NOTE:
When a new exhaust manifold retaining stud is installed, tighten to 9 Nm.
NOTE:
Tighten the exhaust manifold retaining nuts in the sequence shown.
To install, reverse the removal procedure.
Install a new left-hand exhaust manifold gasket.
Tighten to 20 Nm.
NOTE:
www.
Vehicles with secondary air injection (AIR)
2 . Tighten to 35 Nm.
All vehicles
3 . Tighten to 10 Nm.
Flexplate (12.53.13)
Removal
1 . Remove the automatic transmission. <<307-01>>
2 . Detach the accessory drivebelt.
1) Rotate the belt tensioner counter-clockwise.
Use a 3/8 inch square drive bar to rotate the belt tensioner.
2) Detach the accessory drivebelt.
3 . Install the special tool.
4 . NOTE:
Prevent the flexplate from rotating.
Remove the flexplate.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст