Jaguar XJ (X350). Manual — part 1074
Selector Lever Assembly (44.15.04)
Removal
1 . Remove the instrument panel console. <<501-12>>
2 . Remove the ash tray retaining screws.
3 . Detach the ash tray.
4 . Place the transmission selector lever to the "R" position.
5 . NOTE:
Shown with the electric parking brake switch removed for clarity.
Disconnect the electrical connector.
6 . Detach the wiring harness bracket.
1) Reposition the wiring harness.
2) Detach the wiring harness bracket.
7 . Detach the selector lever cable.
8 . Detach the transmission selector lever.
Remove the retaining bolts.
www.
9 . Disconnect the ignition switch interlock cable.
1) Detach the ignition switch interlock cable.
2) Disconnect the ignition switch interlock cable.
Installation
1 . Attach the ignition switch interlock cable.
1) Connect the ignition switch interlock cable.
2) Attach the ignition switch interlock cable.
2 . Attach the transmission selector lever.
Tighten to 11 Nm.
3 . NOTE:
Shown with the electric parking brake switch removed for clarity.
Connect the electrical connector.
4 . NOTE:
Fully extend the selector cable, then retract the selector cable one detent.
Make sure the selector lever cable is in the "R" position.
5 . Make sure the transmission selector lever is in the "R" position.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст