Jaguar XJ (X350). Manual — part 802
To install, reverse the removal procedure.
Tighten to 10 Nm.
2 . Tighten to 10 Nm.
3 . Tighten to 10 Nm.
4 . Tighten the fuel filter retaining bracket.
Tighten 10 mm (0.394 inch's) bolt to 25 Nm.
Tighten 6 mm (0.236 inch's) bolt to 10 Nm.
5 . Tighten to 7 Nm.
6 . Fill and bleed the cooling system.
For additional information, refer to Cooling System Draining, Filling and Bleeding
www.
Exhaust Gas Recirculation (EGR) Valve
Outlet Tube (17.45.11)
Removal
1 . Remove the oil filler cap.
2 . Remove the engine cover.
3 . Install the engine oil filler cap to prevent foreign material entering the valve cover.
4 . NOTE:
Right-hand shown, left-hand similar.
Detach the exhaust gas recirculation (EGR) valve outlet tube.
5 . NOTE:
Right-hand shown, left-hand similar.
Detach the wiring harness.
6 . NOTE:
Right-hand shown, left-hand similar.
Detach the EGR valve outlet tube.
7 . NOTE:
Right-hand shown, left-hand similar.
Remove the EGR valve outlet tube.
Discard the gasket.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст