Jaguar XJ (X350). Manual — part 803
Installation
1 . NOTE:
Right-hand shown, left-hand similar.
Loosley install the EGR valve outlet tube.
Install a new retaining clip.
Do not fully close the retaining clip at this stage.
2 . NOTE:
Right-hand shown, left-hand similar.
Install the EGR valve outlet tube retaining bolts.
Install a new gasket
Do not fully tighten the retaining bolts at this stage.
3 . NOTE:
Right-hand shown, left-hand similar.
Attach the EGR valve outlet tube.
Do not fully tighten the retaining bolt at this stage.
4 . NOTE:
Right-hand shown, left-hand similar.
Fully close the EGR valve outlet tube retaining clip.
www.
5 . NOTE:
Right-hand shown, left-hand similar.
Tighten to 10 Nm.
6 . NOTE:
Right-hand shown, left-hand similar.
Tighten to 5 Nm.
7 . Attach the wiring harness.
8 . Remove the engine oil filler cap.
9 . Install the engine cover.
10 . Install the oil filler cap.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст