Jaguar XJ (X350). Manual — part 542

Crankshaft Front Seal (12.21.14)

Special Service Tools

Locking Tool Flywheel

303-1123

Timing Pin - Automatic Transmission

303-1117

Crankshaft Seal Remover

303-1120

Crankshaft Seal Sleave

303-1122

Crankshaft Seal Installer

303-1121

Removal

1 . Remove the timing belt.

For additional information, refer to Timing Belt

2 . Remove the starter motor.

For additional information, refer to Starter Motor - 2.7L Diesel (86.60.01)

3 . Remove the special tool.

4 . Install the special tool.

5 .

CAUTION: The crankshaft pulley retaining bolt must not be re-used.

Remove the crankshaft pulley.

Remove the retaining bolt.

www.

6 . Install the special tool to the crankshaft.

7 . Using the special tool, remove the crankshaft front seal.

Installation

1

.

CAUTION: Do not use any lubricant on the crankshaft front seal, the special tool or

the crankshaft. Failure to follow this instruction may result in damage to the vehicle.

NOTE:

Make sure all components are clean and dry.

Install a new crankshaft front seal to the special tool.

2 . Reposition the crankshaft front seal along the special tool.

3 . Using the special tool, install the crankshaft front seal to the crankshaft.

4 . Remove the special tool from the crankshaft.

5 . Install the special tool to the crankshaft.

www.