Jaguar XJ (X350). Manual — part 882
Engine Control Module (ECM) (18.30.01)
Special Service Tools
5 Point Security Torx Bit
418-535
Removal
1 . Disconnect the battery ground cable. <<414-01>>
2 . Remove the cowl vent screen. <<501-02>>
3 . Remove the cabin air filter.
1) Detach the cabin air filter.
2) Remove the cabin air filter.
4 . Remove the cabin air filter housing.
www.
5 . Remove the engine compartment panel.
1) Remove the engine compartment panel retaining bolt.
2) Remove the engine compartment panel.
6
.
NOTE:
The engine control module (ECM) electrical connector retaining bolt remains captive in
the electrical connector.
Using the special tool, loosen the ECM electrical connector retaining bolt.
7 . Disconnect the ECM electrical connector.
8 . Remove the instrument panel lower trim panel.
1) Remove the retaining clips.
2) Remove the instrument panel lower trim panel.
9 . Remove the ECM retaining bracket.
10 . Remove the ECM.
1) Detach the retaining clips.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст