Jaguar XJ (X350). Manual — part 559

3 . NOTE:

The retaining bolts must be tightened within twenty minutes of applying the sealant.

Tighten the oil pan extension retaining bolts in the sequence shown.

1) Tighten bolts A to 10 Nm (7 lb.ft). Tighten bolts B to 4 Nm (2 lb.ft).

2) Tighten bolts A to 24 Nm (18 lb.ft). Tighten bolts B to 10 Nm (7 lb.ft).

4 . Install the charge air cooler pipe retaining bolt.

Tighten to 10 Nm (7 lb.ft).

5 . Install the accessory drive belt tensioner bracket retaining bolt.

Tighten to 24 Nm (18 lb.ft).

6 . Install the A/C compressor lower retaining bolt.

Tighten to 24 Nm (18 lb.ft).

7 . Attach the oil temperature sensor harness to the cylinder block.

8 . Install the starter motor.

www.

Tighten to 24 Nm (18 lb.ft).

9 . Reposition the starter motor positive cable.

10 . Attach the starter motor solenoid harness.

Tighten to 7 Nm (5 lb.ft).

11 . Attach the starter motor positive cable.

Tighten to 10 Nm (7 lb.ft).

12 . Install the left-hand turbocharger outlet pipe to the turbocharger.

Tighten to 5 Nm (4 lb.ft).

13 . Connect the left-hand turbocharger outlet pipe.

Tighten to 5 Nm (4 lb.ft).

14 . Install the left-hand turbocharger outlet pipe retaining bolt.

www.