Jaguar XJ (X350). Manual — part 560

Tighten to 24 Nm (18 lb.ft).

15 . Install the oil pan.

For additional information, refer to Oil Pan (12.60.44)

16 . Install the transmission.

For additional information, refer to Transmission - 2.7L Diesel (44.20.01)

Oil Pump (12.60.26)

Removal

1 . Disconnect the battery ground cable.

For additional information, refer to Battery Disconnect and Connect

2 . Remove the crankshaft front oil seal.

For additional information, refer to Crankshaft Front Seal (12.21.14)

3

.

WARNING: Do not work on or under a vehicle supported only by a jack. Always

support the vehicle on safety stands.

Raise and support the vehicle.

4 . Remove the oil pan extension.

For additional information, refer to Oil Pan Extension (12.60.48)

5 . Remove the accessory drive belt tensioner.

Remove the bolt.

6 . Release the right hand turbocharger outlet pipe from the turbocharger.

www.

Release the clip.

7 . Remove the right hand turbocharger outlet pipe.

Remove the bolt.

Release the clip.

8 . Disconnect the generator electrical connector.

9 . Disconnect the battery positive cable from the generator.

Reposition the battery positive cable connector cover.

Remove the nut.

10 . Remove the 2 generator lower bolts.

11 . Release the generator.

Remove the generator upper bolt.

Reposition the generator.

Using a suitable tie strap, secure the generator to the front subframe.

www.