Jaguar XJ (X350). Manual — part 493
144
.
CAUTION: The bolts can only be used twice, mark the bolts with a center punch. If
two punch marks are visible, discard the bolts.
CAUTION: Vehicles fitted with Polydrive cylinder head bolts, the cylinder head
bolts must be removed using a 10 mm Polydrive socket or a 10 mm Allen key. Failure to
follow this instruction may result in damage to the component.
Remove the left-hand cylinder head.
•
Remove the bolts in the indicated sequence.
•
Remove and discard the gasket.
145 . Remove the crankshaft setting peg 303-645 from the crankshaft position sensor location.
146 . Remove the flexplate.
6. Remove the flexplate retaining bolts.
7. Remove the flexplate.
147 . Remove the lower oil pan.
•
Remove and discard the gasket.
www.
148 . Remove the oil strainer.
•
Remove and discard the O-ring seal.
149 . Remove the upper oil pan.
•
Remove and discard the gasket.
150 . Remove the oil pump.
•
Remove and discard the gasket.
151
.
Inspect the tops of the cylinder bores. As necessary remove ridge and carbon build up from
each cylinder.
152 . Remove the piston cooling jets.
153
.
CAUTION: Pistons, connecting rods and connecting rod bearings should be
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст