Jaguar XJ (X350). Manual — part 492
132
.
Remove the camshaft sprockets.
•
Remove the secondary timing chain tensioner and secondary timing chain from the
camshaft sprockets.
133 . Remove the camshaft setting tool.
134 . Remove the camshaft setting tool.
135
.
Remove the camshaft bearing caps.
•
Remove the camshaft bearing cap retaining bolts evenly and in stages.
•
Remove the camshaft bearing caps. Note their orientation and markings, each is
marked with its position (a number) and orientation (an arrow).
136 . Remove the right-hand exhaust camshaft.
137
.
Remove the camshaft bearing caps.
•
Remove the camshaft bearing cap retaining bolts evenly and in stages.
•
Remove the camshaft bearing caps. Note their orientation and markings, each is
marked with its position (a number) and orientation (an arrow).
138 . Remove the right-hand intake camshaft.
www.
139
.
Remove the camshaft bearing caps.
•
Remove the camshaft bearing cap retaining bolts evenly and in stages.
•
Remove the camshaft bearing caps. Note their orientation and markings, each is
marked with its position (a number) and orientation (an arrow).
140 . Remove the left-hand exhaust camshaft.
141
.
Remove the camshaft bearing caps.
•
Remove the camshaft bearing cap retaining bolts evenly and in stages.
•
Remove the camshaft bearing caps. Note their orientation and markings, each is
marked with its position (a number) and orientation (an arrow).
142 . Remove the left-hand inlet camshaft.
143
.
CAUTION: The bolts can only be used twice, mark the bolts with a center punch. If
two punch marks are visible, discard the bolts.
CAUTION: Vehicles fitted with Polydrive cylinder head bolts, the cylinder head
bolts must be removed using a 10 mm Polydrive socket or a 10 mm Allen key. Failure to
follow this instruction may result in damage to the component.
Remove the right-hand cylinder head.
•
Remove the bolts in the indicated sequence.
•
Remove and discard the gasket.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст