Jaguar XJ (X350). Manual — part 1209
6 . Disconnect the fuel fired booster heater electrical connector.
7 . Detach the cooling module wiring harness.
8 . NOTE:
Clamp the coolant hose to minimize coolant loss.
Disconnect the fuel fired booster heater coolant outlet hose.
9 . Detach the fuel fired booster heater.
10 . NOTE:
Clamp the coolant hose to minimize coolant loss.
Remove the fuel fired booster heater.
Disconnect the fuel fired booster heater coolant inlet hose.
www.
Installation
1 . To install, reverse the removal procedure.
Tighten to 9 Nm.
2 . Tighten to 9 Nm.
3 . Check and top-up the engine coolant as necessary.
412-03A : Air Conditionning
Specifications
Specifications
Torque Specifications
Description
Nm lb-ft lb-in
Air conditioning (A/C) compressor mounting retaining bolts
25 18 —
Air conditioning (A/C) compressor manifold and tube retaining bolt
20 15 —
Air conditioning (A/C) condenser core retaining studs
7
— 62
Air conditioning (A/C) condenser core supply and return lines retaining nuts 8
— 71
Power steering oil cooler retaining nuts
7
— 62
Air conditioning (A/C) desiccant bag retaining screw
22 16 —
Air conditioning (A/C) pressure cutoff switch
8
— 71
Air conditioning (A/C) compressor supply and return lines
20 15 —
Engine mounting and bracket assembly retaining bolts
25 18 —
Engine mounting bracket lower retaining bolt
63 46 —
Steering gear mounting bolts
100 74 —
Steering gear shaft pinch bolt
35 26 —
Cooling module retaining bolts
8
— 71
Radiator support bracket retaining bolts
9
— 80
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст