Jaguar XJ (X350). Manual — part 1554
10 . Remove the bumper cover lower retaining screws.
11 . NOTE:
Left-hand shown, right-hand similar.
Detach the rear bumper cover.
Detach the bumper cover from the retaining clips.
12 . Remove the rear bumper.
Detach the wiring harness grommet from the rear quarter panel.
Installation
1 . To install, reverse the removal procedure.
Tighten to 6 Nm.
www.
Rear Bumper Cover - VIN Range: H18680-
>H99999 (76.22.74)
Removal
1 . Raise and support the vehicle.
For additional information, refer to Lifting
2 . Remove the luggage compartment floor covering.
1) Remove the luggage compartment floor covering securing screws.
2) Remove the luggage compartment floor covering.
3 . NOTE:
Left-hand shown, right-hand similar.
Remove the luggage compartment side trim panel.
4 . Remove the rear luggage compartment trim panel covers.
5 . Remove the rear luggage compartment trim.
Remove the rear luggage compartment trim retaining clips.
6 . Disconnect the side marker and parking aid electrical connector.
7 . Remove the rear bumper cover retaining bolts.
8 . NOTE:
Left-hand shown, right-hand similar.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст