Jaguar XJ (X350). Manual — part 1553
Rear Bumper (76.22.27)
Removal
1 . Remove the rear bumper cover.
For additional information, refer to
2 . NOTE:
Left-hand shown, right-hand similar.
Remove the exhaust hanger.
3 . Remove the rear bumper.
Installation
1 . To install, reverse the removal procedure.
Tighten to 17 Nm.
www.
Rear Bumper Cover - VIN Range: G00442-
>H18679 (76.22.74)
Removal
1 . Raise and support the vehicle. <<100-02>>
2 . Remove the side marker lamps. <<417-01>>
3 . Remove the luggage compartment floor covering.
1) Remove the luggage compartment floor covering securing screws.
2) Remove the luggage compartment floor covering.
4 . Remove the luggage compartment side trim panel.
5 . Remove the rear luggage compartment trim retaining screws.
6 . Remove the rear luggage compartment trim.
Remove the rear luggage compartment trim retaining clips.
7 . Disconnect the side marker and parking aid electrical connector.
8 . Remove the rear bumper cover retaining bolts.
9 . NOTE:
Left-hand shown, right-hand similar.
Remove the rear fender splash shield retaining screw.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст