Jaguar XJ (X350). Manual — part 190

Brake Disc - Vehicles With: Standard
Brakes, VIN Range: G00442->G45703
(70.10.11)

Removal

1

.

Remove the brake pads.

For additional information, refer to

Brake Pads - Vehicles With: Standard Brakes, VIN Range:

G00442->G45703 (70.40.03)

2 .

CAUTION: The brake caliper must be supported at all times.

Detach brake caliper anchor plate.

3

.

NOTE:

If the same brake disc is to be installed, the tip of a hub must be marked with a

corresponding part of the brake disc for alignment.

Remove the brake disc.

Remove and discard the brake disc retaining clips.

Installation

1 . To install, reverse the removal procedure.

Install new brake disc retaining clips.

2 . Tighten to 103 Nm.

www.

Brake Disc - Vehicles With: High
Performance Brakes, VIN Range: G00442-
>G45703 (70.10.11)

Removal

1 . Remove the parking brake pads.

<<206-05>>

2 . Remove the brake pads.

1) Remove the brake pad retaining pins.

2) Remove the brake pad anti-rattle spring plate.

3) Remove the brake pads.

3 .

CAUTION: The brake caliper must be supported at all times.

Detach the brake caliper and secure to one side.

Remove and discard the brake caliper retaining bolts.

4

.

NOTE:

If the same brake disc is to be installed, the tip of a hub must be marked with a

corresponding part of the brake disc for alignment.

Remove the brake disc.

Remove and discard the brake disc retaining clips.

Installation

1 . NOTE:

Install new brake caliper retaining bolts.

To install, reverse the removal procedure.

Tighten to 103 Nm.

www.