Jaguar XJ (X350). Manual — part 320
Crankshaft Pulley (12.21.09)
Special Service Tools
Wrench strap-universal
303-D055
Crankshaft Pulley Remover
303-D121
Crankshaft Pulley Installer
303-102
Trust Pad
303-D121-01
Crankshaft pulley installer
303-335/2
Removal
1 . Disconnect the battery ground cable. <<414-01>>
2 . Carry out the cooling system draining procedure. <<303-03A>>
3 . Remove the accessory drivebelt.
1) Rotate the belt tensioner counter-clockwise.
Use a 3/8 inch square drive bar to rotate the belt tensioner.
2) Remove the accessory drivebelt.
4 . Lower the vehicle.
5 . Remove the throttle body. <<303-04A>>
6 . Disconnect the radiator top coolant hose.
www.
7 . Disconnect the coolant hose from the top coolant hose assembly.
8 . Disconnect the hose assembly from the water pump and lower hose.
9 . Remove the hose assembly.
10 . Install the special tool.
11 . Remove the crankshaft pulley retaining bolt.
12 . Install the special tool.
13 . Using the special tools, remove the crankshaft pulley.
Installation
1
.
Using the special tools, install the crankshaft pulley.
Coat the crankshaft pulley keyway with silicone gasket sealant meeting
Jaguar specification.
Coat the sealing surfaces of the crankshaft pulley with silicone gasket
sealant meeting Jaguar specification.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст