Jaguar XJ (X350). Manual — part 321

2 . Install the special tool.

3 . Install the crankshaft pulley bolt.

Torque to 120 Nm.

Loosen the bolt (minimum 1 turn).

Torque to 50 Nm.

Angle Torque to 90°.

4 . Install the hose assembly.

5 . Install the hose assembly to the water pump and lower hose.

6 . Install the coolant hose to the housing assembly.

7 . Connect the radiator top coolant hose.

www.

8 . Install the throttle body. <<303-04A>>

9 . Raise the vehicle.

10 . Install the accessory drivebelt.

1) Rotate the belt tensioner counter-clockwise.

Use a 3/8 inch square drive bar to rotate the belt tensioner.

2) Install the accessory drivebelt.

11 . Lower the vehicle.

12 . Connect the battery ground cable. <<414-01>>

13 . Carry out the cooling system filling and bleeding procedure. <<303-03A>>

Crankshaft Rear Seal (12.21.20)

Special Service Tools

Crankshaft Rear Seal Remover

303-566

Crankshaft Rear Seal Installer

303-178

Crankshaft Rear Seal Installer Adapter Bolts

303-384

Crankshaft Rear Seal Installer Draw Bolts

303-102

Removal

Vehicles With Manual Transmission

1 . Remove the flywheel. For additional information, refer to

For additional information, refer to .

Vehicles With Automatic Transmission

2 . Remove the flexplate. For additional information, refer to

www.