Jaguar XJ (X350). Manual — part 338
22 . Connect the throttle position sensor (TPS) electrical connector.
23 . Connect the throttle motor electrical connector.
24 . Install the engine cover.
25 . Install the air cleaner outlet pipe.
For additional information, refer to
26
.
Fill the cooling system up to the MAX mark on the coolant expansion tank using a fifty
percent mixture of Jaguar Premium Cooling System Fluid or equivalent, meeting Jaguar
specification WSS M97B44-D and fifty percent water.
www.
Lower Intake Manifold (30.15.61)
Removal
1 . Remove the intake manifold.
For additional information, refer to Intake Manifold (30.15.01)
2 . Disconnect the spring lock coupling.
For additional information, refer to Spring Lock Couplings
3 . Disconnect the fuel charging wiring harness.
4 . NOTE:
Fuel may still be present in the fuel injection supply manifold.
NOTE:
Remove and discard the lower intake manifold O-ring seals.
Remove the lower intake manifold.
Installation
1 . NOTE:
Install new O-ring seals.
NOTE:
Tighten in the sequence shown.
To install, reverse the removal procedure.
Tighten the retaining bolts in the sequence shown.
Tighten to 10 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст