Jaguar XJ (X350). Manual — part 337

8

.

NOTE:

The intake manifold retaining bolts in position 1, 4 and 5 are longer than the retaining

bolts in position 2, 3 and 6.

Reposition the intake manifold.

Tighten to 10 Nm.

Complete the tightening sequence.

9 . Install the fuel pressure sensor bracket retaining bolt.

10 . Attach the fuel pressure sensor bracket.

11 . Install the engine cover left-hand side retaining bracket.

12 . Attach the evaporative emission canister purge valve transfer pipe.

13 . Install the engine cover front retaining bracket.

www.

14 . Attach the coolant temperature sensor wiring harness.

15 . Attach the intake manifold front retaining bracket.

16 . Fully tighten the intake manifold front retaining bracket.

17 . Fully tighten the intake manifold right-hand side retaining bracket.

18 . Fully tighten the intake manifold right-hand side retaining bracket.

19 . Attach the engine wiring harness to the intake manifold side retaining bracket.

20 . NOTE:

Un-cap the coolant hoses.

Attach the coolant hoses to the throttle body.

21 . Connect the positive crankcase ventilation (PCV) hose.

www.