Jaguar XJ (X350). Manual — part 1065
Loss of automatic
transmission fluid
Leak at oil cooler.
Check the torque of the tubes.
Check the tubes, connections and
seals.
INSTALL new oil cooler.
Removal and installation
Transmission Fluid Cooler - 2.7L V6 - TdV6
(44.24.10)
Special Service Tools
Remover/Installer, Cooling Hose Clamp
303-397 (24-003)
Removal
1 . Remove the air deflector.
For additional information, refer to Air Deflector (76.11.41)
2 . Reposition the left-hand splash shield.
3 . NOTE:
Discard the O-ring seals.
Detach the transmission fluid cooler tubes.
Allow the transmission fluid to drain into a suitable container.
www.
4 . NOTE:
Install a suitable pipe clamp to minimize coolant loss.
Using the special tool, detach the transmission fluid cooler coolant hose.
5 . NOTE:
Install a suitable pipe clamp to minimize coolant loss.
Using the special tool, detach the transmission fluid cooler coolant hose.
6 . Detach the transmission fluid cooler.
7 . Remove the transmission fluid cooler.
Installation
1 . Install the transmission fluid cooler.
2 . Attach the transmission fluid cooler.
Tighten to 5 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст