Jaguar XJ (X350). Manual — part 1066
3 . NOTE:
Remove the pipe clamp.
Using the special tool, attach the transmission fluid cooler coolant hose.
4 . NOTE:
Remove the pipe clamp.
Using the special tool, attach the transmission fluid cooler coolant hose.
Install new O-ring seals.
Attach the transmission fluid cooler tubes.
Tighten to 10 Nm.
6 . Reposition the left-hand splash shield.
7 . Install the air deflector.
For additional information, refer to Air Deflector (76.11.41)
8 . Carry out a transmission fluid level check.
For additional information, refer to Transmission Fluid Level Check
9 . Check and top up the cooling system.
For additional information, refer to Cooling System Draining, Filling and Bleeding
5 . NOTE:
www.
Transmission Fluid Cooler Tubes - 4.2L NA
V8 - AJV8/4.2L SC V8 - AJV8/3.0L NA V6 -
AJ27/3.5L NA V8 - AJV8 (44.24.19)
Removal
Vehicles with 3.0L engine
1 . Remove the air cleaner. <<303-12A>>
Vehicles with 3.5L or 4.2L engine
2 . Remove the air cleaner. <<303-12B>>
All vehicles
3 . Remove the radiator splash shield. <<501-02>>
4 . Lower the vehicle.
5 . Disconnect the transmission fluid cooler tubes.
Drain fluid into a suitable container.
Remove and discard transmission fluid cooler tube O-ring seals.
6 . Raise the vehicle.
7 . Remove the air deflector.
Vehicles with 3.0L engine
8 . Release the transmission fluid cooler tube retaining bracket.
9 . Remove the transmission fluid cooler tube retaining bracket.
10 . Remove the power steering pump to steering gear pressure line retaining nut.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст