Jaguar XJ (X350). Manual — part 314

20

.

CAUTION: Cap the power steering line to prevent loses of fluid and dirt ingress.

CAUTION: If power steering fluid comes into contact with the paintwork, the

affected area must be immediately washed down with cold water.

NOTE:

Drain the fluid into a suitable container.

Disconnect the power steering reservoir to power steering pump supply line.

21

.

CAUTION: Cap the power steering lines to prevent loses of fluid and dirt ingress.

CAUTION: If power steering fluid comes into contact with the paintwork, the

affected area must be immediately washed down with cold water.

NOTE:

Drain the fluid into a suitable container.

Disconnect the power steering pump to steering gear supply line.

Remove and discard the O-ring seal.

22 . NOTE:

Inlet manifold shown removed for clarity.

Detach the right-hand valve cover wiring harness.

23 . Disconnect the left-hand ignition coils electrical connectors.

www.

24 . Detach the left-hand valve cover wiring harness.

25 . Remove the dipstick tube retaining bolt.

Reposition the dipstick tube.

26 . NOTE:

Left-hand shown, right-hand similar.

Loosen the exhaust manifold retaining nut.

27 . NOTE:

Left-hand shown, right-hand similar.

Install the special tool to the exhaust manifold.

Install the retaining bolt.

28 . NOTE:

Left-hand shown, right-hand similar.

Install the retaining bolt.

www.