Jaguar XJ (X350). Manual — part 124
11 . Remove the securing nuts.
Installation
1 . To install, reverse the removal procedure.
Tighten to 5 Nm.
2 . Tighten to 5 Nm.
3 . Tighten to 7 Nm.
4 . Tighten to 5 Nm.
5 . Connect the battery ground cable.
6
.
Where required. Using the Jaguar approved diagnostic system pressurize the air suspension
system.
7 . Start and run the engine for 2 minutes to make sure the vehicle has leveled.
www.
Air Suspension Solenoid Valve Block
Removal
1 . Using the Jaguar approved diagnostic system depressurize the air suspension system.
2 . Disconnect the battery ground cable.
3 . Remove the luggage compartment floor covering.
1) Remove the luggage compartment floor covering securing screws.
2) Remove the luggage compartment floor covering.
4
.
CAUTION: Before the spare wheel retainer is removed the lower locking nut should
be loosened.
Remove the spare wheel.
5 . Remove the reservoir insulator.
6 . Disconnect the electrical connector.
7 . Disconnect the electrical connector.
8
.
WARNING: Loosen the pipes no more than one full turn to allow the stored air
pressure to vent for a minimum of three seconds.
Remove the air pipes.
1) Detach the blue air pipe.
2) Detach the white air pipe.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст