Jaguar XJ (X350). Manual — part 1145

6 . Remove the scuff plate trim panel.

7 . Detach and reposition the floor covering.

8 . Remove the floor aperture cover.

9 . Detach the fuel pump module electrical connector from the retaining bracket.

10 . Disconnect the fuel pump module electrical connector.

11 . Disconnect the fuel fired booster heater fuel supply line quick release coupling.

For additional information, refer to Quick Release Coupling - Push Connect

12 . Disconnect the fuel supply line quick release coupling.

For additional information, refer to Quick Release Coupling - Push Connect

www.

13

.

CAUTION: Make sure no damage occurs to the fuel pump module when removing

the locking ring.

Using the special tool, remove the fuel pump module locking ring.

14 . Detach and reposition the upper part of the fuel pump module.

15 . Disconnect the fuel transfer line quick release coupling.

For additional information, refer to Quick Release Coupling - Push Connect

16 . Disconnect the fuel transfer line.

17 .

CAUTION: Make sure no damage occurs to the fuel level float.

Remove the fuel pump module.

Remove and discard the fuel pump module gasket.

Installation

WARNING: Place the vehicle in a quarantined area and arrange "No Smoking/Petrol Fumes"

signs about the vehicle.

WARNING: Before any work is carried out on the fuel system, ground the vehicle to earth

and maintain the ground connection until the work is complete.

WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working

www.