Jaguar XJ (X350). Manual — part 62
23 . Install the radiator splash shield.
For additional information, refer to
Radiator Splash Shield (76.22.90)
24
.
NOTE:
The final tightening of the rear lower arm inner retaining nut and bolt must be carried
out with the vehicle on its wheels.
NOTE:
Left-hand shown, right-hand similar.
Tighten to 175 Nm.
25
.
NOTE:
The final tightening of the front lower arm inner retaining nut and bolt must be carried
out with the vehicle on its wheels.
Left-hand shown, right-hand similar.
Tighten to 175 Nm.
26 . NOTE:
Left-hand shown, right-hand similar.
Tighten to 70 Nm.
27 . NOTE:
Right-hand shown, left-hand similar.
Remove the radiator support.
NOTE:
www.
28
.
NOTE:
Vehicles with 3.5L or 4.2L engine without supercharger shown, vehicles with 4.2L
engine with supercharger similar.
Remove the special tool.
Loosen the special tool adjustment bolts.
29
.
NOTE:
Vehicles with 3.5L or 4.2L engine without supercharger shown, vehicles with 4.2L
engine with supercharger similar.
Remove the special tools.
Vehicles with 3.5L or 4.2L engine without supercharger
30
.
Install the throttle body.
For additional information, refer to
Throttle Body - Vehicles Without: Supercharger, VIN
Range: G00442->G45703 (19.70.04)
For additional information, refer to
Throttle Body - Vehicles Without: Supercharger, VIN
Range: G45704->G99999 (19.70.04)
All vehicles
31 . Check the caster and camber adjustment.
For additional information, refer to
Camber and Caster Adjustment
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст