Jaguar XJ (X350). Manual — part 63
Front Stabilizer Bar - 2.7L Diesel (60.10.01)
Removal
1 . Remove the front subframe.
For additional information, refer to
Front Subframe - 2.7L Diesel (76.10.05)
2 . Remove the front subframe spacer.
3 . Remove the stabilizer bar.
Installation
1 . To install, reverse the removal procedure.
Tighten to 55 Nm.
Front Stabilizer Bar Link (60.10.02)
Removal
1 . Raise and support the vehicle.
2 . Remove the stabilizer bar link retaining nut.
3 . Remove the stabilizer bar link.
Installation
1 . Install the stabilizer bar link.
2 . Install the stabilizer bar link retaining nut.
www.
Tighten to 43 Nm.
3 . Lower the vehicle.
4
.
NOTE:
The final tightening of the stabilizer bar retaining nut and bolt must be carried out with
the vehicle on its wheels.
Tighten to 70 Nm.
Stabilizer Bar Link Bushing (60.10.03)
Special Service Tools
Support
204-339
Bush Installer
204-340
Support
204-341
Bush Remove
204-342
Removal
1 . Remove the rear lower arm.
For additional information, refer to
2 . Using the special tools remove the stabilizer bar link bushing.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст