Jaguar XJ (X350). Manual — part 556

Install a new O-ring seal.

2 . Loosely install the oil pan.

Install a new oil pan gasket.

3 . Reposition the oil strainer.

4 . Install the oil strainer retaining bolt.

Tighten to 10 Nm.

5

.

NOTE:

A new oil pan is supplied with the drain plug installed. Check that the drain plug is

tightened to 25 Nm.

Install the oil pan.

Tighten to 10 Nm.

6 . Connect the oil temperature sensor electrical connector.

Attach the oil temperature sensor wiring harness to the oil pan.

www.

7 . Lower the vehicle.

8 . Using special tool lower the left-hand side of the engine.

9 . Raise the vehicle.

10 . Install the left-hand engine mounting retaining nut.

Tighten to 63 Nm.

11 . Install the right-hand turbocharger outlet tube retaining bolt.

Tighten to 10 Nm.

12 . Install the right-hand turbocharger outlet tube.

13 . Install the generator cooling duct (if equipped).

14 . Remove the piece of string securing the steering gear.

www.