Jaguar XJ (X350). Manual — part 554
6 . Check and top up the engine oil.
7 . Run the engine.
8 . Check and if necessary top up the engine oil.
Oil Pan (12.60.44)
Special Service Tools
Engine Lifting Bracket
303-1129
Engine Support Bracket
303-021
Removal
1 . Remove the oil filler cap.
2 . Remove the engine cover.
3 . Install the engine oil filler cap to prevent foreign material entering the valve cover.
www.
4 . Install the engine lifting bracket.
5 . Install the engine support bracket.
6 . Remove the air deflector.
For additional information, refer to Air Deflector (76.11.41)
7 . Drain the engine oil.
Place suitable container under the vehicle.
Remove the drain plug and drain the engine oil.
8
.
Make sure the alignment mark on the steering gear pinion seal protection cover is central to
the steering gear pinion casting.
9 . Disconnect the power steering control valve actuator electrical connector.
10 . Detach the lower steering column.
Remove the steering gear shaft pinch bolt.
11 . Detach the steering gear.
Remove the steering gear retaining bolts.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст