Jaguar XJ (X350). Manual — part 499
22 . Install the oil strainer.
•
Install a new O-ring seal.
•
Tighten to 12 Nm.
23 . Install the oil pan.
•
Install a new gasket.
•
Install, but do not fully tighten the retaining bolts.
24
.
Tighten to 12 Nm.
•
Tighten in the sequence shown.
•
A new oil pan is supplied with the drain plug installed. Check that the drain plug is
tightened to 25 Nm.
25 . Install the flexplate.
www.
14. Install the flexplate.
15. Install the flexplate retaining bolts.
•
Tighten to 15 Nm.
•
Tighten to 110 Nm.
26 . Reposition the crankshaft.
•
Install the crankshaft setting peg 303-645 to the crankshaft position sensor location.
27 . Install a new left-hand cylinder head gasket.
•
Make sure the cylinder head dowels are correctly located.
28
.
CAUTION: Vehicles fitted with Polydrive cylinder head bolts, the cylinder head
bolts must be installed using a 10 mm Polydrive socket or a 10 mm Allen key. Failure to
follow this instruction may result in damage to the component.
CAUTION: Tighten the bolts 1 to 10 in the sequence shown.
Install the left-hand cylinder head.
16. Tighten bolts 1 to 10 to 20 Nm.
17. Tighten bolts 1 to 10 to 35 Nm.
18. Tighten bolts 1 to 10 to 90°.
19. Tighten bolts 1 to 10 to 90°.
20. Tighten bolts 11 to 12 to 25 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст