Jaguar XJ (X350). Manual — part 1493
10 . Install the rear door speaker.
Tighten the retaining bolts.
11 . Connect the rear door speaker electrical connector.
12 . Using a suitable sealant, seal the rear door panel seal.
13 . Install the rear door latch trim panel.
Tighten the retaining screw.
14 . Install the rear door inner weather strip.
15 . Remove the protection from the rear door trim and rear door frame.
16 . NOTE:
Make sure the area is clean and dry.
Apply a 10 mm bead of sealant to the rear door window glass seal and the rear door panel seal.
Apply a suitable glass primer to the rear door glass.
www.
17 . Install the rear door glass trim panel.
Apply a suitable metal primer to the inner edge of the rear door glass trim panel.
Apply a suitable rubber primer to the inner edge of the rear door glass.
18 . Install the rear door trim panel.
For additional information, refer to
Rear Door Trim Panel (76.34.04)
Rear Door Window Regulator and Motor
(86.25.09)
Removal
1 . Remove the rear door trim panel.
For additional information, refer to Rear Door Trim Panel (76.34.04)
2 . Detach the rear door wiring harness.
Disconnect the rear door speaker electrical connector.
3 . Detach the rear door wiring harness grommet.
4 . Remove the rear door inner weather-shield retaining screw covers.
5 . Remove the rear door inner weather-shield.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст