Jaguar XJ (X350). Manual — part 335
8 . Detach the engine wiring harness from the intake manifold side retaining bracket.
9 . Detach the intake manifold right-hand side retaining bracket.
10 . Loosen the intake manifold right-hand side retaining bracket.
11 . Detach the intake manifold front retaining bracket.
12 . Loosen the intake manifold front retaining bracket.
13 . Detach the coolant temperature sensor wiring harness.
14 . Remove the engine cover front retaining bracket.
www.
15 . Detach the evaporative emission canister purge valve transfer pipe.
16 . Remove the engine cover left-hand side retaining bracket.
17 . Remove the fuel pressure sensor bracket retaining bolt.
18 . Detach the fuel pressure sensor bracket.
19 . Detach the intake manifold.
20
.
NOTE:
The evaporative emission canister purge valve transfer pipe is attached to the
induction manifold by a quick release coupling.
Disconnect the evaporative emission canister purge valve transfer pipe.
21 . Disconnect the manifold absolute pressure (MAP) sensor electrical connector.
22 . Disconnect the fuel pressure sensor vacuum hose.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст