Jaguar XJ (X350). Manual — part 151
Fill the CV joint boot with 65 grams of grease.
Vehicles with supercharger
4 .
CAUTION: Make sure the CV joint ball bearings do not drop out of the CV joint.
NOTE:
Use a CV grease meeting Jaguar specification.
Fit the outer CV joint.
Fill the CV joint with 100 grams of grease.
All vehicles
5 . NOTE:
Make sure enough air is present in the CV boot.
Install the new retaining clip.
Using a suitable tool, install the retaining clip.
6 . Remove the halfshaft from the clamp.
7 . Install the halfshaft.
For additional information, refer to
Rear Halfshaft (47.10.13)
www.
206 : Brake System
206-00 : Brake System – General Information
Specifications
Specifications
Lubricants, Fluids, Sealers and Adhesives
CAUTION: Do not use brake fluid ITT Super Dot 4 on 2006my vehicles onwards.
Failure to follow this instruction may result in damage to the vehicle.
NOTE:
Brake fluid ITT Super Dot 4 has now been superseded by Shell ESL Super Dot 4 which is
the Jaguar recommended brake fluid. Shell ESL Super Dot 4 can be used on all model
years.
Item
Specification
Brake fluid ITT Super Dot 4
Brake fluid Shell ESL Super Dot 4
Brake Lining and Disc Specifications
Item
Specification
Front brake disc diameter - Vehicles with 4.2L engine
320 mm (12.8 in)
Front brake disc diameter - Vehicles with Brembo brakes
365 mm (14.6 in)
New front brake disc nominal thickness - Vehicles with 3.0L,
3.5L or 4.2L engine
30 mm (1.2 in)
New front brake disc nominal thickness - Vehicles with Brembo
brakes
32 mm (1.28 in)
Worn brake disc discard thickness - Vehicles with 3.0L, 3.5L or
4.2L engine
28 mm (1.14 in)
Worn front brake disc discard thickness - Vehicles with Brembo
brakes
30 mm (1.2 in)
Rear brake disc diameter - Vehicles with 3.0L, 3.5L or 4.2L
engine
288 mm (11.52 in)
Rear brake disc diameter - Vehicles with Brembo brakes
330 mm (13.2 in)
New rear brake disc nominal thickness - Vehicles with 3.0L, 3.5L
or 4.2L engine
20 mm (0.8 in)
New rear brake disc nominal thickness - Vehicles with Brembo
brakes
15 mm (0.6 in)
Worn rear brake disc minimum thickness - Vehicles with 3.0L,
3.5L or 4.2L engine
18 mm (0.72 in)
Worn rear brake disc minimum thickness - Vehicles with Brembo
brakes
13 mm (0.52 in)
Maximum front and rear brake disc runout (installed) - Vehicles
with 3.0L, 3.5L or 4.2L engine
0.076 mm ( 0.003 in)
Maximum front brake disc runout (installed) - Vehicles with
Brembo brakes
0.070 mm ( 0.002 in)
Maximum rear brake disc runout (installed) - Vehicles with
Brembo brakes
0.070 mm ( 0.002 in)
Maximum new front and rear brake disc thickness variation -
Vehicles with 3.0L, 3.5L or 4.2L engine
0.005 mm ( 0.0002 in) in
360°
Maximum new front brake disc thickness variation - Vehicles
with Brembo brakes
0.010 mm (0.0003 in) in
360°
Maximum new rear brake disc thickness variation - Vehicles with
Brembo brakes
0.010 mm (0.0003 in) in
360°
Maximum used front and rear brake disc thickness variation -
Vehicles with 3.0L, 3.5L or 4.2L engine
0.009 mm (0.0004 in) in
360°
Maximum front and rear hub face runout (installed) - Vehicles
with 3.0L, 3.5L or 4.2L engine
0.05 mm ( 0.002 in)
Maximum front hub face runout (installed) - Vehicles with
Brembo brakes
0.05 mm ( 0.002 in)
Maximum rear hub face runout (installed) - Vehicles with
Brembo brakes
0.05 mm ( 0.002 in)
Front brake caliper piston diameter - twin piston - Vehicles with
3.0L, 3.5L or 4.2L engine
38 mm (1.52 in) and 45
mm (1.8 in)
Rear brake caliper piston diameter - Vehicles with 3.0L, 3.5L or
4.2L engine
43 mm (1.72 in)
Front brake caliper piston diameter - twin piston - Vehicles with
Brembo brakes
38 mm (1.52 in) and 44
mm (1.8 in)
Rear brake caliper piston diameter - twin piston - Vehicles with
Brembo brakes
28 mm (1.12 in) and 30
mm (1.2 in)
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст