Jaguar XJ (X350). Manual — part 150

6 . Remove the halfshaft from the clamp.

7 . Install the halfshaft.

For additional information, refer to

Rear Halfshaft (47.10.13)

Outer Constant Velocity (CV) Joint Boot
(47.10.32)

Removal

1 . Remove the Halfshaft.

For additional information, refer to

Rear Halfshaft (47.10.13)

2 .

CAUTION: Use suitable protective covers to protect the halfshaft.

Using a suitable clamp, secure the halfshaft.

3 . Remove the outer constant velocity (CV) joint boot retaining clip.

Remove and discard the retaining clip.

4 .

CAUTION: Do not damage the bearing retainer.

NOTE:

The outer CV joint is retained to the shaft by a spring clip.

Using a suitable brass drift, remove the outer CV joint.

www.

5 . Remove the retaining clip.

Remove and discard the retaining clip.

6 . Remove the outer CV joint boot.

Remove and discard the retaining clip.

Installation

All vehicles

1 . Install the outer CV joint boot.

Install the new retaining clip.

Using a suitable tool, install the retaining clip.

2 . Install the new retaining clip.

Vehicles without supercharger

3 .

CAUTION: Make sure the CV joint ball bearings do not drop out of the CV joint.

NOTE:

Use a CV grease meeting Jaguar specification.

Fit the outer CV joint.

Fill the CV joint with 55 grams of grease.

www.