Jaguar XJ (X350). Manual — part 76
Vehicles without Brembo brakes
14 . Attach the brake caliper.
Install new brake caliper retaining bolts.
Tighten to 103 Nm.
Vehicles with Brembo brakes
16 . Attach the brake caliper.
Install new brake caliper retaining bolts.
Tighten to 70 Nm.
All vehicles
17 . Install the front muffler.
18 . Install both the upper arms.
For additional information, refer to
19 . Fill the right-hand fuel tank saddle.
20
.
CAUTION: The final tightening of the rear suspension components must be carried
out with the vehicle on its wheels.
Tighten to 133 Nm.
21 . Check the wheel alignment and adjust as necessary.
22 . Carry out the rear subframe alignment procedure.
www.
Rear Stabilizer Bar Link (64.35.24)
Removal
1 . Remove the wheel and tire.
For additional information, refer to
Wheel and Tire (74.20.05)
2 . NOTE:
Left-hand shown, right-hand similar.
Remove the stabilizer bar link retaining nut dust cover.
3 . NOTE:
Right-hand shown, left-hand similar.
Detach the stabilizer bar link.
4 . NOTE:
Right-hand shown, left-hand similar.
Remove the stabilizer bar link.
Installation
1 . To install, reverse the removal procedure.
Tighten to 48 Nm.
2 . Tighten to 48 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст