Jaguar XJ (X350). Manual — part 77
Upper Arm (64.25.31)
Removal
1 . Remove the wheel and tire.
<<204-04>>
2 . Detach the high intensity discharge (HID) sensor link rod.
3 . Detach the anti-lock brake system (ABS) sensor wiring harness.
4 . Detach the upper arm from the wheel knuckle.
5 . Remove the upper arm.
Installation
1
.
CAUTION: The final tightening of the rear suspension components must be carried
out with the vehicle on its wheels.
CAUTION:
Install the upper arm.
2
.
CAUTION: The final tightening of the rear suspension components must be carried
out with the vehicle on its wheels.
Attach the upper arm to the wheel knuckle.
www.
3 . Attach the anti-lock brake system (ABS) sensor wiring harness.
4 . Attach the high intensity discharge (HID) sensor link rod.
5 . Install the wheel and tire.
<<204-04>>
6 . Lower the vehicle.
7
.
CAUTION: The final tightening of the rear suspension components must be carried
out with the vehicle on its wheels.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст