Jaguar XJ (X350). Manual — part 1500

22 . Install the rear window finisher.

Apply pressure to the rear window finisher to make betaseal overflow.

Remove the surplus Betaseal.

23 . NOTE:

Leave the Betaseal to dry.

Apply suitable adhesive tape to hold the rear window finisher into position.

24 . Connect the rear window glass electrical connectors.

1) Anttena 1.

2) Anttena 2.

3) Heated rear window glass.

4) Heated rear window glass.

25 . Connect the rear window glass electrical connectors.

B Heated rear window glass.

H Heated rear window glass.

26 . Connect the rear window glass electrical connectors.

1) Anttena 1.

2) Anttena 2.

3) Heated rear window glass.

4) Heated rear window glass.

H.

L.

27 . Remove the suitable adhesive tape holding the rear window finisher into position.

www.

28 . Remove the protective tape around the rear rear window glass aperture.

29 . Remove the suitable protective sheet and board from the rear seats.

30 . NOTE:

Left-hand shown, right-hand similar.

With assistance, install the luggage compartment lid.

Install the retaining nuts.

31 . Attatch the luggage compartment wiring harness.

32 . Connect the luggage compartment wiring harness electrical connector.

33 . Install the luggage compartment side trim panel.

34 . Install the luggage compartment floor covering.

35 . Align the luggage compartment lid.

For additional information, refer to

36 . Install the high mounted stoplamp.

For additional information, refer to

37 . Install the parcel shelf.

For additional information, refer to

www.