Jaguar XJ (X350). Manual — part 1501
Window Control Switch (86.25.08)
Removal
1 . Detach the window control switch.
2 . Remove the window control switch.
Disconnect the electrical connector.
Installation
1 . To install, reverse the removal procedure.
Windshield Glass (76.81.40)
Special Service Tools
Spray Bottle
WK9
Lubricant Concentrate
WK9L
Adhesive Removal Blade - Body
WK6
Cheese Wire Handles and Cheese Wire
42-001A and 42-001A-01
Removal
1 . Remove the interior mirror. <<501-09>>
2 . Remove both A-pillar trim panels. <<501-05>>
www.
3 . Remove both sun visors. <<501-05>>
4 . Remove the overhead console. <<501-12>>
5 . Remove both sun visor retaining clips.
6 . NOTE:
Right-hand shown, left-hand similar.
Detach the front occupant assist handle screw covers.
7 . NOTE:
Right-hand shown, left-hand similar.
Remove the front occupant assist handle.
8 . Using a suitable adhesive tape, support the headliner.
9 . Apply a suitable protective tape to the front edge of the headliner.
10 . NOTE:
Left-hand shown, right-hand similar.
Disconnect the heated windshield glass electrical connectors.
11
.
CAUTION: Make sure the windshield finisher insert is not bent on removal. Failure
to follow this instruction may result in damage to the component.
Remove the windshield finisher.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст