Jaguar XJ (X350). Manual — part 736
Tighten to 40 Nm.
Supercharger Belt Idler Pulley - VIN
Range: G45704->G99999 (18.50.09)
Removal
1 . Disconnect the battery ground cable.
For additional information, refer to Battery Disconnect and Connect
2 . Remove the air cleaner outlet pipe.
For additional information, refer to Air Cleaner Outlet Pipe (19.10.31)
3 . Remove the coolant expansion tank.
For additional information, refer to Coolant Expansion Tank (26.15.01)
4 . Using the special tool, detach the supercharger belt.
5 . Loosen the water pump pulley retaining bolts.
6
.
Detach the accessory drive belt.
www.
1) Rotate the accessory drive belt tensioner counter-clockwise.
Use a 3/8 inch square drive bar to rotate the accessory drive belt
tensioner.
2) Detach the accessory drive belt.
7 . Remove the water pump pulley.
Discard the water pump pulley retaining bolts.
8 . Remove the supercharger belt idler pulley and bracket assembly.
9 . Remove the supercharger belt idler pulley.
Installation
1 . To install, reverse the removal procedure.
Tighten to 40 Nm.
2 . Tighten to 9 Nm.
3 . Tighten to 10 Nm + 45°.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст