Jaguar XJ (X350). Manual — part 780
Tighten to 10 Nm.
3 . Tighten to 21 Nm.
4 . NOTE:
Un-cap the exposed ports.
Connect the coolant hoses.
5 . Connect the EGR valve electrical connector.
6
.
Install the throttle body.
For additional information, refer to Throttle Body - 4.2L SC V8 - AJV8, VIN Range: G00442-
>G45703 (19.70.04)
For additional information, refer to Throttle Body - 4.2L SC V8 - AJV8, VIN Range: G45704-
>G99999 (19.70.04)
Vehicles without supercharger
7 . Install the EGR valve.
Install a new EGR valve to exhaust manifold to EGR valve tube gasket.
Install a new EGR valve to intake manifold gasket.
Tighten to 10 Nm.
8 . Tighten to 21 Nm.
www.
9 . NOTE:
Un-cap the exposed ports.
Connect the EGR valve electrical connector.
1) Connect the EGR valve coolant hoses.
2) Connect the EGR valve electrical connector.
Left-hand drive vehicles with Supercharger
10 . Install the engine compartment panel.
11 . Install the cabin air filter housing.
12 . Install the cabin air filter housing retaining nut.
13 . Install the cabin air filter.
For additional information, refer to Cabin Air Filter (76.10.09)
All vehicles
14 . Check and top up the coolant expansion tank.
15
.
NOTE:
For NAS vehicles only.
If required, carry out a long drive cycle.
For additional information, refer to Powertrain Control Module (PCM) Long Drive Cycle Self-
Test
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст