Jaguar XJ (X350). Manual — part 845
4
.
Remove the evaporative emission canister vent solenoid.
Remove and discard the evaporative emission canister vent solenoid O-ring
seal.
Installation
1 . NOTE:
Install a new evaporative emission canister vent solenoid O-ring seal.
To install, reverse the removal procedure.
Tighten to 6 Nm.
Fuel Tank Pressure Sensor (19.55.31)
Removal
1 . Remove the fuel tank. <<310-01>>
2 . Disconnect the fuel pressure sensor electrical connector.
3 . Remove the fuel pressure sensor.
Installation
1 . To install, reverse the removal procedure.
www.
303-14A : Electronic Engine Controls – 3.0L NA V6 –
AJ27
Specifications
Specifications
Torque Specifications
Description
Nm lb-ft lb-in
Camshaft position (CMP) sensor retaining bolt
7
-
62
Heated oxygen sensor (H02S)
40 30 -
Catalyst monitor sensor
40 30
Crankshaft position (CKP) sensor retaining bolt
7
-
62
Knock sensor retaining bolt
25 18 -
Variable camshaft timing oil control solenoid retaining bolt
10 -
89
Intake manifold tuning (IMT) valve retaining bolts
10 -
89
Engine coolant temperature (ECT) sensor
17 13 -
Manifold absolute pressure (MAP) sensor retaining screws
10 -
89
Oil temperature sensor
15 11 -
Fuel rail pressure (FRP) sensor retaining bolts
10 -
89
Fuel rail pressure (FRP) sensor bracket upper retaining bolts
6
-
53
Fuel rail pressure (FRP) sensor bracket lower retaining bolt
10 -
89
Engine control module (ECM) electrical connector retaining bolt 5
-
44
Lubricants, fluids, sealers and adhesives
Description Specification
Sealant
WSK-M4G-328-A3
General procedures
Brake Pedal Position (BPP) Switch
Adjustment
No Data Available
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст