Jaguar XJ (X350). Manual — part 844
Evaporative Emission Canister Purge Valve
- 4.2L NA V8 - AJV8/3.5L NA V8 - AJV8,
VIN Range: G45171->G99999 (17.15.30)
Removal
1 . Remove the engine cover.
2 . Disconnect the evaporative emission canister purge valve hose.
3 . Disconnect the evaporative emission canister purge valve hose.
4 . Disconnect the evaporative emission canister purge valve electrical connector.
5 . Remove the evaporative emission canister purge valve retaining bolt.
6 . Reposition the engine cover left-hand mounting bracket.
7 . Remove the evaporative emission canister purge valve.
www.
Installation
1 . To install, reverse the removal procedure.
Tighten to 10 Nm.
2 . Tighten to 10 Nm.
Evaporative Emission Canister Vent
Solenoid (17.15.45)
Removal
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working
on or near any fuel related components. Highly flammable vapors are always present and may
ignite. Failure to follow these instructions may result in personal injury.
WARNING: Do not carry or operate cellular phones when working on or near any fuel
related components. Highly flammable vapours are always present and may ignite. Failure to
follow these instructions may result in personal injury.
1 . Raise and support the vehicle.
For additional information, refer to Lifting
2 . Disconnect the evaporative emission canister vent solenoid vapor hose.
3 . Disconnect the evaporative emission canister vent solenoid electrical connector.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст