Jaguar XJ (X350). Manual — part 345
29 . NOTE:
Inlet manifold shown removed for clarity.
Attach the right-hand valve cover wiring harness.
30 . NOTE:
Left-hand shown, right-hand similar.
Install the engine compartment panel.
Tighten to 10 Nm.
31 . NOTE:
Left-hand shown, right-hand similar.
Install the engine compartment panel retaining bolts.
Tighten to 10 Nm.
32 . Install the cabin air filter housing.
Tighten to 10 Nm.
33 . Install the cowl vent screen. <<501-02>>
34 . Install the engine cover.
www.
35 . Connect the battery ground cable. <<414-01>>
36 . Refill the engine with oil.
Oil Pump (12.60.26)
Removal
1 . Remove the timing drive components.
For additional information, refer to Timing Drive Components (12.65.13)
2 . NOTE:
Engine inverted for clarity.
Remove the oil pump tube.
3 . Remove the oil pump.
Remove and discard the O-ring seal.
Inspect the oil pump for damage and wear.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст