Jaguar XJ (X350). Manual — part 527

18 . Install the engine compartment brace bar.

Tighten to 25 Nm.

19 . Install the fuel filter securing bracket.

Tighten 10 mm (0.394 inch's) bolt to 25 Nm.

Tighten 6 mm (0.236 inch's) bolt to 8 Nm.

20 . Install the fuel filter.

For additional information, refer to Fuel Filter - 2.7L Diesel (19.25.02)

21 . Connect the radiator bottom hose.

22 . Connect the automatic transmission cooler coolant hose.

23 . NOTE:

Power steering pump shown removed for clarity.

NOTE:

Remove the blanking caps.

NOTE:

Install a new O-ring seal.

Connect the A/C high pressure line.

Tighten to 10 Nm.

www.

24

.

CAUTION: If power steering fluid comes into contact with the paintwork, the

affected area must be immediately washed down with cold water.

NOTE:

Remove the blanking caps.

NOTE:

Install a new O-ring seal.

Connect the power assisted steering (PAS) pump to steering gear high-pressure line.

Tighten to 22 Nm.

25 . Attach the PAS fluid reservoir.

26 . Attach the front air spring supply tube.

27 . Connect the PAS pump supply hose.

28 . Connect the charge air cooler intake hose.

www.