Jaguar XJ (X350). Manual — part 325
15 . Remove the crankshaft front seal.
For additional information, refer to Crankshaft Front Seal (12.21.14)
16 . Detach the coolant hose.
17 . Remove the coolant hose.
18 . Remove the water pump.
19 . Detach the fuel supply manifold retaining bolt.
20 . Remove the accessory drive belt tensioner.
21 . Detach the engine harness from the right-hand idler pulley.
Detach the splash shield.
Detach the engine harness from the right-hand idler pulley.
22 . Remove the right-hand idler pulley.
www.
23 . Remove the left-hand idler pulley.
24 . Remove the power steering pump upper retaining bolts.
25 . Raise the vehicle.
26 . Detach the power steering pump.
27 . Lower the vehicle.
28 . Disconnect the crankshaft position (CKP) sensor electrical connector.
29 . NOTE:
Right-hand shown, left-hand similar.
Disconnect the camshaft position (CPS) sensors.
30 . Remove the engine front cover
Remove and discard the engine front cover gaskets.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст